2023-05-16installation of automatic depollution Lubrication device for steel wire ropes in ore terminals using U.LUBE steel wire rope grease
2023-05-16A high temperature fan bearing in a float glass production plant had problems such as poor lubrication and oil loss and leakage. After U.LUBE service team received the customer's inquiry, the technical service team immediately went to the production workshop for on-site research.
2023-03-28A steam locomotive maintenance plant has encountered this kind of influence due to the lowering of weather temperature, and the lubricant used by its rail vehicle to wheel steering bracket bearing will have the problem that the lubricant becomes sticky and the vehicle starts difficult during the working process in winter in the north.
2023-03-22The high temperature painting chain in an auto parts painting workshop had problems such as wear and abnormal vibration. After U.LUBE service team received the customer's inquiry, the technical service team immediately went to the painting workshop for on-site investigation.
2023-03-15?After replacing the oil use, the overall lubrication of semi-self-grinding open gear is basically stable, and the overall oil film changes significantly compared to before replacing the oil, and the graphite lapping area decreases more significantly compared to before replacing the oil (at this time the tooth surface temperature difference decreases by about 2℃).
2023-03-11?There are four Φ4.0x6.0m mills produced by Jiangyin Neutral Machinery in the gasification plant of a coal chemical plant. The open gears are lubricated by spray system. After an on-site inspection by the U.LUBE team, it was found that the mill tooth surfaces had different degrees of damage and the lubrication effect was poor, which would affect the production of the whole enterprise in a serious situation if not solved in time.
